Factory Cheap Car Glass Tint Film 1.52*30m Auto Solar Window Film Skin and Eye Protection Use for 18-20 Cars

Short Description:

This product is a nano-ceramic thermal insulation film with high light transmission and high thermal insulation produced by relying on our company’s “high-performance window film thermal insulation medium” with independent intellectual property rights. It does not block GPS and mobile phone signals, and has strong weather resistance and does not fade. The light transmittance is 70%, the infrared blocking rate is 95-99%, and the ultraviolet blocking rate is 99-100%. It is used in automobiles and architectural glass, which can greatly improve human comfort and significantly reduce the energy consumption of air conditioners.


Product Detail

Product Tags

High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we’re hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for Factory Cheap Car Glass Tint Film 1.52*30m Auto Solar Window Film Skin and Eye Protection Use for 18-20 Cars, Our corporation eagerly looks ahead to setting up long-term and helpful enterprise partner interactions with clients and businessmen from all around the earth.
High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we’re hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for China Solar Window Film and Car Window Film, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don’t need to waste time shopping around.
Features

1. High cost performance. Combined with international leading technology, high thermal insulation performance can greatly reduce the load of on-board air conditioners and reduce fuel consumption.

2. High transparency. The haze of our high-performance insulating film is less than 1%, with high definition and no dizziness.

3. High thermal insulation rate. The ultraviolet and infrared blocking rate of this series of thermal insulation films can reach more than 99%.

4. Colorfast and long life. Using high-quality base film and adhesive layer, after installation, it will not turn yellow, will not degumming, and will not produce air bubbles, and its service life can be as long as 10 years.

5. Anti-glare. After the film is applied, the eye comfort of the driver and passengers can be greatly improved, and accidents caused by glare factors can be avoided.

6. Safety explosion-proof. The thermal insulation film is firmly attached to the surface of the glass window to reduce personal injury and property damage in the event of an accident.

7. Safe, environmentally friendly and non-toxic. Use non-toxic, harmless and tasteless environmentally friendly raw materials, no pungent odor, no color fading and fading.

8. Reduce the deterioration and fading of interior decoration and prolong the service life of the car.

Product Usage

It is used in shopping malls, schools, hospitals, commercial office buildings, homes, etc., for thermal insulation and UV protection of architectural glass;

It is used for heat insulation and UV protection of vehicle glass, such as automobiles, ships, airplanes, etc.

Used in other fields with anti-infrared requirements.

Instructions

The first step: prepare water bottle, non-woven fabric, plastic scraper, rubber scraper, utility blade;

Step 2: Clean the window glass with detergent;

Step 3: According to the size of the window, cut out the window film of the corresponding size;

Step 4: Prepare the installation solution: add an appropriate amount of neutral detergent (shower gel is better) in the water, put it into a watering can, and spray it evenly on the glass surface;

Step 5: Tear off the release film and stick the film on the wet glass surface;

Step 6: The release film is used as a protective film to cover the surface of the window film, and the water and air bubbles are squeezed out with a scraper;

Step 7: Wipe the surface with a dry cloth, remove the release film, and complete the installation.

Packaging and Storage

Packing: 30×1.52m/roll, 30×300m/roll, specifications can be customized.
Storage: In a cool, dry and tidy place.


  • Previous:
  • Next:

  • Write your message here and send it to us