Ukufunxa ukukhanya kweThermogenic Masterbatch
IParameter yeMveliso
| Ikhowudi | FX-6P-PET (isiseko sepolymer eyenziwe ngokwezifiso) |
| Imbonakalo | Isuntswana eliluhlaza okwesibhakabhaka |
| Izithako ezisebenzayo | I-cesium tungsten oxide |
| Umxholo osebenzayo oqinileyo (%) | 6.0±0.2 |
| I-viscosity yangaphakathi (IV, g/10min) | 0.58±0.02 |
| Indawo yokunyibilika (℃) | 260±10 |
| Isiqulatho sokufuma (%) | ≤0.2 |
| Ubuninzi (g/cm3） | 1.39 |
| Ubunzima bamasuntswana ali-100(g) | 1.79 |
| Ixabiso lokuhluza (mPa·cm2/g) | 0.05 |
Uphawu lweMveliso
Ikhono elihle lokujikeleza, i-75D / 72F ubude okanye i-filament emfutshane, akukho mqobo;
Ukufunxa ukukhanya okuhle kunye neempawu zokufudumeza, umahluko wobushushu ukuya kuthi ga kwi-10 ℃;
Ukusebenza okungapheliyo, akukho ukubola kunye nokuhlamba, ubomi nje kuphela imveliso ngokwayo;
Ikhuselekile kunye nokusingqongileyo, akukho zinto ziyityhefu neziyingozi.
Indawo yosetyenziso
Isetyenziselwa ukuphuhliswa kwefayibha ye-thermogenic okanye ilaphu, njengempahla yasebusika, njengempahla yangaphantsi efudumeleyo, idyasi, njl.
Indlela yokusetyenziswa
Ukongeza umlinganiselo (ubunzima) kucetyiswa i-1.5 ~ 3%, njengoko ixuba ngokulinganayo kunye ne-fiber-grade polyester chips, kwaye ivelise njengenkqubo yokuqala.Sinokubonelela ngezinto ezahlukeneyo zesiseko seplastiki, njengePET, PP, PA, PA66 njalo njalo.
Ukugcinwa kwePakethi
Ukupakisha: 25 kgs / ibhegi.
Ugcino: kwindawo epholileyo neyomileyo.
